• Checking information of installed USB storage (device name, total space, and free space) API added.

Update processes are the same as the release 1.8.x

PPPoE

• PPPoE is supported

• Video advanced deinterlace mode is added

• When users change the setting of IP configuration, the commands are applied in real time and no need to reboot the system.

• DO and RE Server are newly added to Event Server
• Log-in step is added when using SMTP server

• HVBR mode is newly supported in addition to VBR and CBR

• 'Force Update' check box is added in System Update of Webpage
• MIC input is supported at remote control site

• PTZ driver API manual.pdf
• TN0104E [NVE] PTZ protocol commands list.pdf

Update processes are the same as the release 1.8.x

Decoding Capability Enhanced

• Decoding capability optimized for high-end CPU like Core2Quad.

• Audio can be heard on the web page ActiveX.
• Record stop button added for user's convenience.

• Audio settings could be adjusted
• PTZ.html works even in the Firefox

• Bad gateway settings can be automatically changed.
• mDNS protocol is supported in case IP address is being changed

• Many small bugs are fixed to improve user experiences.
• Detailed information could be seen on the change note.

• NVE USB Storage Data Playback API.pdf manual is added
• This manual is about how to playback the USB storage data via network connnection.

Release 1.8.x

With the introduction of Protection Model, the method of Firmware updaing has changed. Please take a look at the following technote before going any further: TN0090E [NVE] How to Update the protection model firmware. Contrary to the Release 1.7.x kernel, ocx, web pages are included in one package file. Therefore, there is no need to update each separately.

USB recording

• Once again, USB recording module has been fully renovated.
• New USB recording library is provided.

• To protect the user created materials in IPC/NVE, such as their own web pages, their own brand name, Protection Model has been introduced.
• User has an option to use or not but the firmware/web pages/Ocx updaiting method should be changed.
• IPAdminTool has also been modified to support the Protection Model.

• SMTP server is added.
• E-mail notification or E-mail attachment feature also supported.

• Most of features found on the PrismII are now included on web pages.
• Layout and design also changed to enhance the usability of our customers.

Release 1.7.x

Web pages are no longer included in this firmware. Therefore, Kernel update and web pages update have to be done separately. .

USB recording

• Full channel recording is supported.
• MPEG4 recording is supported.
• Limitations: Full frame rate at full channel are not stable at this version. USB recording API is provided but API for viewing and transferring recorded images to other devices are not supported yet.

• FTP event server is added.
• Passive mode and schedule mode recording are supported.

• RTSP over HTTP is supported
• UDA5 API and RTSP API both supported for development.

• Dynamic DNS is supported.

• MD can be configured in macroblock units.
• Motion area related bugs are fixed
• Motiondata.cgi added

• QoS is supported

• Dome update feature added
• Corrected to consume less bandwidth
• Detailed error codes are assigned for system updates. (firmware, web pages etc)

Documents

• IPC4100 HW Manual-Eng - updated.
• IPC4500 HW Manual-Eng - updated.
• IPC1100 HW Manual-Eng - updated.
• IPC module HW manual-Eng -updated
• NVE HW Manual - updated.
• NVE User's Manual - updated.
• UDA5 NVE SDK Manual - updated.
• NVE Web Page user's Manual - updated.
• IPAdminTool user's Manual - updated.
• IPAdminTool user's Manual - updated
• IPC3100 Hardware Manual - created
• IPC3500 Hardware Manual - created
• RTSP Method Reference. chm has been changed to NVE RTSP Reference Manual.
• NVE HTTP API for USB storage driver Manual - deleted
• TN0070E [NVE] How to change configuration using RS-232C - created
• TN0074E [NVE] Recording MPEG-2 stream - created
• TN0075E [NVE] Enable USB Recording - created
• TN0078E [NVE] Ports List which NVE uses - created
• TN0079E [NVE] Collecting log messages -created
• TN0080E [NVE] Sending PTZ commands though HTTP command

Release 1.6.x

The path of UMC.CAB(includes ActiveX) is changed. So UMC.CAB must be also updated when updating the firmware that is included at SDK 1.6.x.

User management

• Supported a user management.
• Default users (user name/password/security level) : root/pass/6, guest/guest/1
• Security level : 1 ~ 9
• Maximum length of user name/password are 32/8 letters

Event notification

• Event : boot / Motion detection / DI / DO / Video Status
• Event server : TCP server

Video

• Supported MPEG-2 stream.

Motion detection

• Supported motion detection.

Multicast

• Simultaneosly multicast and unicast is allowd.

IPAdminTool

• Fixed "Bind Error"
• Added sorting and filtering the NVE/IPC list.
• Able to set DHCP.

Release 1.5.x

System management

• Supportd Nickname.
• Factory default (by reset button or by RTSP command).
• Saves configuration across rebooting.
• Capability query (Hardware information string only)